Regular Bookcase Stairs

Bookcase Staircase Assembly Instructions 

Click Here For A Pdf Of the Instructions

Tools Needed - 

Power screwdriver with a Phillips #2 medium head bit. 

Optional Items - Sandpaper. - Wood glue. - Paint 

Notes 

Setup takes roughly 1 hour. It is easiest if you have two people doing it. If you are not sure how to install a piece always refer back to the picture above to see how everything fits together. Please read through the entire instructions to familiarize yourself first before beginning assembly. 

The wood used in your loft will typically have a (good) side and a (bad) side. The bad side will usually have a lumber grading stamp or some imperfections. Before assembly lay all the pieces out on the floor and try to position the wood with the “good” side facing up or out. Take into consideration which side you usually will be climbing up on and place the best rungs and legs on that side. The Instruction Below Is For The Twin Size. The Parts List For All Of The Sizes Scroll Down Below

Pilot holes have been pre drilled into all necessary pieces. You may want to add soap to the screws, the soap acts as a lubricant and makes driving them into the wood easier. 

Step One 

Lay the 2” x 12” x 44” On Edge, As Shown In The Image. Place the 2” x 12 x 19- 1/2” Top Shelf On Top Of The 2” x 12” x 44”. That Is On Edge. Drill The Screws In To The Wood, Nice And Tight

Step Two

Place The 2” x 12” x 9-1/2” Under The Top Shelf. Drill And Screw Nice And Tight. 

Step Three

Place The 2” x 12” x 26-5/8” Under The 2” x 12” x 9-1/2”. Screw On Too The Size Of The 2” x 12” x 44” As Well. 

Step Four 

Place The 2” x 12” x 35-1/2” Under The 2” x 12” x 9-1/2”. Screw Nice And Tight And Screw On Too The Size Of The 2” x 12” x 44” As Well.