Wide Bookcase Stairs Assembly Instructions
Wide Bookcase Assembly Instructions
Scroll To The Bottom For The Plank Sizes
All Parts Have Pilot Holes.
Step One
Take back vertical panel that has slots and stand it up. Take the longest plank and put it on the floor and screw from the back. Pilot holes are on the back vertical panel. The height of the vertical post and planks
will depend on the size Stairs you purchased.
Step Two
Create L shape with each step landing to 9.5 inch step brace. Screw from the top and the bottom of the spacer. Also from the back of the vertical post to the plank.
Step Three
Place step landing into slot and screw from back of vertical backing with supplied screw (1-1/4" Corse)
Step Four
Continue with the next smaller plank. Screw the plank to the spacer in the end and middle. Also to the vertical post. Use the pilot holes for location. The size of the plank will depend on the size of the Stairs. Scroll down on the page for the sizes.
Step Five
Continue with the 3 rd to 6 step as was done to the previous step.
PARTS LIST FOR 16" AND 20" WIDE STAIRS
70-1-1/4" Coarse Screws
Twin Size: 45.5 In.(L) x 45.5 In.(H) x 16" or 20" In.(D) 4 Steps
1- Vertical Post 41.25" Tall
2-44" Long Planks
1-33" Long Plank
1-22" Long Plank
1-11" Long Plank
6-9.5" x (16" or 20") Spacers
Full Size: 56.5 In.(L) x 56.5 (H) x 16" or 20" In.(D) 5 Steps
1- Vertical Post 51.5" Tall
2-55" Long Planks
1-44" Long Plank
1-33" long Plank
1-22" Long Plank
1-11" Long Plank
8-9.5" x (16" or 20") Spacers
Queen Size: 66.5 In.(L) x 66.5 In.(H) x 16" or 20" In.(D) 6 Steps
1- Vertical Post 61.5 Tall
2-66" Long Plank
1-55" Long Plank
1-44" Long Plank
1-33" Long Plank
1-22" Long Plank
1-11" Long Plank
10-9.5" x x (16" or 20") Spacers
King Size: 77.5 In.(L) x 77.5 In.(H) x 16" or 20" In.(D)
1- Vertical Post
The Height of each Stair is 9 In. The Step area is about 11 In. Deep.
