XO Loft Bed Instructions

XO Loft Bed Instructions

Step One

Take an inventory Of The Parts You Received Based On The Part List Below.

Step Two

Lay first leg down on the floor. Front leg will have two angles, one on top, second on the bottom. Attach first rail with matching angle to said leg with supplied screws, bolts,

lock nut and washer. Then attach safety rail with matching angle to said leg. Back Leg will have no angle. Front legs will have an angle. Repeat this step to the other set of legs

Step Three

Stand up both sets and connect the two with the 2"x6" Steps, Shelves and Safety Rail for the head of the bed.

Step Four

Put on the plywood backing for the Bookcase.

Step Five

Put on the bed slats. Put on the bunkie board on top of the slats.

Parts List

• 2- Upright Post 2"x6"x 69" Tall
• 2- Upright Post 2"x6"x69" Tall
• 2- Rails With 2"x2" Ledge (Size Will Depend On The Bed Size Chosen)
• 8- 2"x6" Steps And Bookcase Shelves (Size Will depend on the Size of the Bed chosen)
• 2- 2"x6" Safety Rail (Size Will Depend On The Bed Size Chosen)
• 5- 2"x4" Bed Slats For Mattress Support (Size Will Depend On The Bed Size Choose)
• 1- Set Of Bunkie Boards. (If Chosen As An Option. Board Size will depend on the Bed Size)
• 1-Set Of Plywood Backing For The Bookcase
• 1- Set Of Hardware

Tools Needed

- Power screwdriver with a Phillips #2 medium head bit.

- Adjustable (or 9/16 In.) wrench.

- Hammer.

Optional Items

- Sandpaper.

- Wood glue.

- Paint.

The Safety Rails Must Bed Used At All Times. Children Under 6 Can Not Use The Top Bed.